D-Link DAP1650 range extender setup

D-Link is the best-known brand to provide you with high-quality devices and the best services. It provides various extender models to boost your internet speed and cover a larger area. It comes with all the latest technologies and features to make it easy to access and control it. You can easily log in to your device using the dlinkrouter.local web address and then set it up. Here, we will discuss more the Setup procedure of your D-Link DAP 1650 extender and the firmware update.

Easy Instructions for D-Link DAP 1650 Setup 

If you think it is hard to do the d link dap 1650 setup that is not the case. Having smart technologies makes it easy to log in to your device and do the setup. Check out the simple setup instructions below.

1. You have to unbox your DAP-1650 device and then plug it into the power outlet near your router.

2. Now, wait till you see the LED is solid green and then you can do the Dlink setup wizard.

3. Connect your extender to your computer using the Ethernet cable.

4. Open the web browser on your computer and then enter the web address DLINKAP.LOCAL on the address bar.

5. You will see the DAP-1650 setup wizard web page and click on the Next button.

6. Select the mode of your extender and click on the Next button.

7. You have to create a new name for your wireless network and the password.

8. Your D-link device will start to scan the area for signals.

9. You have to enter the security password and click next.

10. Once you review the settings, you can finish the process.

D-Link DAP 1650 Firmware update

If you are having trouble with the performance of your D-Link device, you can check if you need to do the D-LINK DAP 1650 FIRMWARE update. You can easily update your device’s firmware with some simple steps given below.

  • You have to open a browser and download the latest version for your DAP-1650.
  • Unzip the downloaded file.
  • Now go to the login page of your D-Link device and login to it using default credentials
  • Tap on Maintenance and select the firmware.
  • Now, browse the Firmware from the folder where the download file is and open it.
  • Click on the continue button to update the firmware.
  • With that, your D-LINK DAP 1650 FIRMWARE will be upgraded.

Conclusion

The information provided here will be a great help when you want to do the d link dap 1650 setup and update the firmware. You might face some common issues while doing the setup. But these issues can be resolved easily with some simple steps provided with the setup guide. For more detailed information, get in touch with us and we will assist you properly with all of your queries.

Comments

  1. Dlink Extender11 July 2021 at 22:31

    Extend the network of your home wireless network by installing the dlink wifi extender at your place. D'Link extender can be installed using the web browser method or WPS method. Use the IP address Dlinkap.local to sign into the d'link extender setup page. You must know the login details of d'link extender to sign in.

    ReplyDelete
  2. Andrew Hymon9 September 2021 at 00:10

    Really Very Helpful Information you have Shared


    https://helpline-numbers.com/d-link.html

    ReplyDelete
  3. David Berkowitz13 September 2021 at 02:02

    dlinkap.local setup

    ReplyDelete
  4. Trishant Patel10 November 2021 at 02:53

    Can i have guide to access admin panel of 192.168.1.1,192.168.0.1,192.168.10.1 please.

    ReplyDelete
  5. Steve4 December 2021 at 21:26

    Thanks Foe sharing very informative website looking for next update. If you need any help for linksys website visit myrouter.local

    ReplyDelete

Post a Comment

Popular posts from this blog

www.dlinkrouter.local : Dlink Setup Wizard

Image
What are the steps if using 192.168.1.1 does not load the D'link router login page for D-Link DIR-615 Wireless-N300 Router? In case the router’s configuration and login page fail to load, verify that the computer is connected to the router only and not to any other network. If the problem remains, it means that the D-Link router must have been used by someone else and that user might have modified the default login address. In this situation, you may have to try to reset your D- Link router to its factory default settings. To do so, press and hold the Reset button positioned at the back of the router for about 10 seconds. Now, you have reset the router to its factory default settings by which you will also be able to access the configuration page by visiting the default IP Address 192.168.1.1. What are the steps for D'link router login? Open any web browser of your choice on a computer or laptop and enter the default IP address of the router into the address bar, which is...
Read more